Similar to the first Arca Rail, however, this one has T slots on both sides allowing you to attach shooting accessories such as flashlight and laser. Edges are smooth and makes it very comfortable to shoot offhand. It includes an extended dust fill cap. Features: Aluminum 6061 T6 Hard black anodize Arca Swiss Rail underneath with Picatinny at the end Also has 1/4 x 20 threads for common camera tripod attachment

Do you need to extend the picatinny rail further on the Impact? Then this is the perfect add-on. Very sturdy and hardly any flex. It comes with an extended dust cap for your convenience.

The Arca Swiss rail allows for easy and fast adjustments. This 3 in 1 rail has a screw hole for your common camera tripod adapter. It has the Arca Swiss rail which allows you to easily slide your gun back and forth. If you have a picatinny bipod, there's also a picatinny rail in the front. It comes with an extended dust cap for your convenience. Overall, it's a well versed rail for the FX Impact.

This rail changes an already great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends. From the top rail mounted bipod by GRS to inline night optics, and everything in between. Features Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting. M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights. It has a built in 20 MOA, giving your scope more elevation for long range shooting. Has a Delrin shroud clamp to prevent shroud drooping. It minimizes or eliminates any point of impact changes when switching suppressors. Available in standard and compact sizes with black anodize. Weight = 1 lb Extends past the gun block 12.5 inches For a 600mm barrel, pair it up with this adapter to allow the shroud to pass the rail.

Use this adapter to convert a picatinny rail to Arca. Useful if you already have a tripod that is setup for Arca.  Features: 6061 T6 Aluminum with stainless steel screws Use 4mm hex key  

This compact arca swiss rail is great for the FX Impact with the short 300cc bottle. Makes the gun very comfortable to shoot off hand and allows you to attach your favorite shooting accessories such as a flashlight or laser pointer. Features: Aluminum 6061 T6 Hard black anodized Arca swiss rail with picatinny at the end 1/4 x 20 threads for common photography tripod adapter

Easily clamp this Arca Swiss rail to an existing picatinny rail to extend the bipod rail. It has T slots on both sides allowing you to attach T slot/M Lok accessories. Features: 6061 T6 aluminum black anodize 4mm hex key required to loosen and tighten clamp 1/4 - 20 threads to connect common camera tripod adapters 2.25 inches wide x 7 inches long 7.7 oz

This rail is great for guns that have a short picatinny by the trigger guard. Very solid and allows for more rail. Features 2 inch arca 4.5 inch of picatinny 1/4-20 threaded hole for camera tripod adapters 6061 T6 Aluminum Black anodized Weight = 5.3oz

Easily replace the factory picatinny scope rail with our version for more rigidity.  Made of 6061 aluminum and black anodized.

This new rail changes an already great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends. From the top rail mounted bipod by GRS, to inline night optics and everything in between. Features Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting. M-Lok slots allow you to attach accessories like: flashlight, laser & weights. It has a built in 20 MOA, gives your scope more elevation for long range shooting. Has a Delrin shroud clamp to prevent shroud drooping. It minimizes or eliminates any point of impact changes when switching suppressors. Available in standard and compact sizes with black anodize. Weight = 11oz Extends past gun block 8 inches

This rail is for those that do not need picatinny slots at the end of their rail, this one has full arca. Ideal for the 580cc and 700cc bottles.  Features: MLok slots at the bottom and on both sides of the rail for add-on accessories. Low profile, hugs closer to the bottle Sling QD slots on both sides 6061 T6 Aluminum  Black anodize From start of trigger guard until the end of rail is 15.75 inches x 2.75 inches wide

Features:  Arca Swiss rail with a short picatinny rail in front. T slot rail runs along both sides of the Arca Swiss rail to attach any m lok accessories Foldable stock magnetically secured Built in detachable bag rider Adjustable cheek rest Our very popular adjustable buttstock QD sling mount holes integrated into the stock on both sides Authentic FX gun grip Weights around 4lbs OUR CHASSIS WILL FIT ALL MODELS OF DREAMLINES (Bullpup versions will require additional trigger assembly. Contact your FX dealer) How To Install - Dreamline Classic How to install with Power Adjuster

Use this delrin clamp to prevent your factory shroud from drooping. It attaches to the side rail MLok slots. Note* will not work on carbon fiber shrouds. If you have the carbon fiber tension kit from FX, you'll also need the bushing to go inside the TRS clamp ST0040 Features: Made of black delrin Two screws and two washer  

Features: Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting. M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights. Built in 20 MOA, giving your scope more elevation for long range shooting. Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors. Weight = 1lb 6061 T6 aluminum Black anodized Note* Highly recommend pairing with the Maverick Cheek Riser ST0046

This rail has a full arca rail on the bottom for your compact FX Impact. It comes with an extended magnetic dust cap. Features: Made of 6061 T6 Aluminum Black anodized Nylon tipped set screw to prevent rail from flexing against the bottle Overall length from trigger guard to the end is 11.25 inches M Lok slots on bottom and on the side for your go to accessories 1/4-20 threaded hole for camera tripod adapters Quick disconnect holes on both sides