Bottle Degasser and Valve Removal Kit, Plus Tank Bags and Valve Adapters
This week we released a tool that customers have asked about for a long time. The Bottle Degasser and Valve Removal Kit ST0105 combines bottle degassing and valve removal in one tool for compatible carbon fiber airgun bottles. Bottle service and travel preparation are part of owning a PCP, so I also want to cover the tank bag and valve adapter that support the rest of your air supply.
The Bottle Degasser and Valve Removal Kit ST0105.
Quick Summary
- ST0105: degas a compatible carbon fiber bottle and remove its valve with one steel tool.
- Check fit: the valve needs a side hole larger than 3.2 mm for the engagement pin. Use with a 19 mm open end wrench.
- Tank Bag ST0036: fits a 9.0L tank, two pockets, MOLLE webbing and an ID slot.
- Valve Adapter ST0037: converts 7/8-14 to M18x1.5, 7075 aluminum.
Bottle Degasser and Valve Removal Kit ST0105
The ST0105 lets you release a bottle's air before removing the valve for maintenance or travel preparation. The steel tool body has a 3.2 mm engagement pin that fits into the valve side hole. A threaded degassing screw releases air through a central vent, and the wrench flats accept a 19 mm open end wrench for valve removal and reinstallation.
Check compatibility and work safely
The tool is designed for valves with a side hole larger than 3.2 mm, and it is not universal. Confirm your valve dimensions before ordering. Fully depressurize the bottle before removing the valve, and follow the bottle and valve manufacturer service instructions.
The steel body, engagement pin and 19 mm wrench flats.
Saber Tactical Tank Bags ST0036
The Tank Bag ST0036 fits a 9.0L tank with a maximum 23 inch circumference and 23 inch length, or 29 inches with the valve. It comes in grey with an extra inch of diameter to make larger tanks easier to remove, two large accessory pockets, a long Velcro strip for patches, MOLLE webbing and a clear ID slot. The original green bags have been retired.
The grey Tank Bag ST0036.
Tank Valve Adapter M18x1.5 ST0037
The ST0037 converts tank valve threads from 7/8-14 to M18x1.5 for carbon fiber gun tanks. It is 7075 aluminum in black anodize, with female 7/8-14 threads that accept valves with 0.75 inches of thread or less.
The ST0037 converts 7/8-14 to M18x1.5.
At the Fill Station
If filling your Impact is awkward, our fill upgrades Field Notes covers the Extended Dust Cap ST0019 and Extended Foster QD ST0010.
Frequently Asked Questions
What does the Saber Tactical ST0105 do?
It degasses a compatible carbon fiber airgun bottle and removes its valve with the same tool.
Will the ST0105 fit my bottle?
It requires a valve side hole larger than 3.2 mm and is not universal. Confirm dimensions before ordering.
What wrench does it use?
A 19 mm open end wrench, not included.
What size tank fits the Tank Bag ST0036?
A 9.0L tank up to 23 inches in circumference and 23 inches long, or 29 inches with the valve.
What does the ST0037 convert?
7/8-14 tank valve threads to M18x1.5.
Final Thoughts
Air supply care is easy to overlook until something needs service. With the right tool, a good bag and the correct adapter, your bottles and tanks are ready for maintenance, travel and the next session.
- Choosing a selection results in a full page refresh.
!